Registration page

Problemsolving
   

Registration page

The registration page prints a horizontal arrow and a vertical arrow that show how far from center an image can be printed on the page. You can set registration values for a tray to center images on the back and front of a page. Setting the registration also allows edge-to-edge printing to be set to within approximately 2 mm (0.08 inch) of all edges of the paper. Image placement varies slightly for each tray. Perform the registration procedure for each tray.

  1. Press Menu to enter the MENUS.

  2. Press HP 3550 3700 arrow down Registration page to highlight Configure Device.

  3. Press HP 3550 3700 checkmark Registration page to select Configure Device.

  4. Press HP 3550 3700 arrow down Registration page to highlight PRINT QUALITY.

  5. Press HP 3550 3700 checkmark Registration page to select PRINT QUALITY.

  6. Press HP 3550 3700 arrow down Registration page to highlight SET REGISTRATION.

  7. Press HP 3550 3700 checkmark Registration page to select SET REGISTRATION.

    NOTE

    You can select a tray by specifying a Source. The default Source is Tray 2. To set the registration for Tray 2, go to step 12. Otherwise, proceed to the next step.

  8. Press HP 3550 3700 arrow down Registration page to highlight Source.

  9. Press HP 3550 3700 checkmark Registration page to select Source.

  10. Press HP 3550 3700 arrow down Registration page or HP 3550 3700 arrow up Registration page to highlight a tray.

  11. Press HP 3550 3700 checkmark Registration page to select the tray.

    After selecting the tray, the printer control panel returns to the SET REGISTRATION menu.

  12. Press HP 3550 3700 arrow down Registration page to highlight PRINT TEST PAGE.

  13. Press HP 3550 3700 checkmark Registration page to select PRINT TEST PAGE.

  14. Follow the instructions on the printed page.

HP 3550 3700 Registration page