Manual color options

Color
   

Manual color options


Manual color adjustment allows you to adjust the Color (or Color Map) and Halftoning options individually for text, graphics, and photographs.

NOTE

Some applications convert text or graphics to raster images. In these cases, the Photographs settings will also control text and graphics.

Halftone options affect the resolution and clarity of your color output. You can select halftone settings for text, graphics, and photographs independently. The two halftone options are Smooth and Detail.

For the HP Color LaserJet 3700 series printer, the following options are available for the Halftone setting:

  • The Smooth option provides better results for large, solid-filled print areas. It also enhances photographs by smoothing out fine color gradations. Choose this option when uniform and smooth area fills are top priority.

  • The Detail option is useful for text and graphics that require sharp distinctions among lines or colors, or images that contain a pattern or a high level of detail. Choose this option when sharp edges and details are top priority.

The Neutral Grays setting determines the method used for creating gray colors used in text, graphics, and photographs.

For the HP Color LaserJet 3700 series printer, the following options are available for the Neutral Grays setting:

  • Black Only generates neutral colors (grays and black) using only black toner. This guarantees neutral colors without a color cast.

  • 4-Color generates neutral colors (grays and black) by combining all four toner colors. This method produces smoother gradients and transitions to non-neutral colors, and it produces the darkest black.

The Edge Control (for the HP Color LaserJet 3550 series printer) setting determines how edges are rendered. Edge control has two components: adaptive halftoning and trapping. Adaptive halftoning increases edge sharpness. Trapping reduces the effect of color plane misregistration by overlapping the edges of adjacent objects slightly.

For the HP Color LaserJet 3700 series printer, the following levels of edge control are available:

  • Maximum is the most aggressive trapping setting. Adaptive halftoning is on for this setting.

  • Normal is the default trapping setting. Trapping is at a medium level and adaptive halftoning is on.

  • Light sets trapping at a minimal level, and adaptive halftoning is on.

  • Off turns off both trapping and adaptive halftoning.

For the HP Color LaserJet 3550 series printer, the following levels are available:

  • Maximum is the most aggressive trapping setting.

  • Normal sets the trapping at a medium level.

  • Light sets trapping at a minimal level.

  • Off is the default trapping setting. Trapping is turned off.

For the HP Color LaserJet 3700 series printer, the following values are available for the RGB Color settings:

  • Default instructs the printer to interpret RGB color as sRGB. The sRGB standard is the accepted standard of Microsoft and the World Wide Web Consortium (http://www.w3.org).

  • Vivid instructs the printer to increase the color saturation in the midtones. Less colorful objects are rendered more colorfully. This value is recommended for printing business graphics.

  • Device instructs the printer to print RGB data in raw device mode. To render photographs properly with this selection, you must manage image color in the application or operating system.

HP 3550 3700 Manual color options