Loading paper into Tray 2

Printing tasks
   

Loading paper into Tray 2

CAUTION

To avoid jams, never open or remove a tray during printing.

  1. Pull Tray 2 out of the printer and remove any paper.

    HP 3550 3700 t2 remove Loading paper into Tray 2

  2. Raise the output bin extension.

    HP 3550 3700 t2 output extender Loading paper into Tray 2

  3. Move the side width guides until the blue arrows on the width guides point to the size of paper you are loading.

    HP 3550 3700 t2 side adjust Loading paper into Tray 2

  4. On the back of the tray, press the blue ridges and slide the length guides until the arrow symbol points to the size you are loading.

    HP 3550 3700 t2 back adjust Loading paper into Tray 2

  5. Load the paper into the tray. If this is special paper such as letterhead, load it with the side to be printed down and the top edge toward the front of the tray.

    NOTE

    If you are duplex printing, see 2-sided (duplex) printing for loading instructions.

    HP 3550 3700 t2 load Loading paper into Tray 2

  6. Push down on the stack of paper to lock the metal lift plate into place. Make sure that the stack of paper is flat and that the paper is below the height tabs.

    HP 3550 3700 t2 push down metal plate Loading paper into Tray 2

  7. Slide the tray back into the printer.

    HP 3550 3700 t2 replace Loading paper into Tray 2
HP 3550 3700 Loading paper into Tray 2