Print quality menu
|
Print quality menu
This menu allows you to adjust all aspects of print quality, including calibration, registration, and color half tone settings.
| Menu item | Values | Description |
|---|---|---|
| ADJUST COLOR | CYAN DENSITY MAGENTA DENSITY YELLOW DENSITY BLACK DENSITY RESTORE COLOR VALUES | Allows you to modify the half tone settings for each color. The default for each color is 0. |
| SET REGISTRATION | PRINT TEST PAGE Source ADJUST TRAY 1 ADJUST TRAY 2 ADJUST TRAY 3 | Allows 1-sided and 2-sided image alignment. The default for Source is TRAY 2. The default for the sub-items ADJUST TRAY 1, ADJUST TRAY 2, and ADJUST TRAY 3 is 0. |
| AUTO SENSE MODE | EXPANDED SENSING TRANSPARENCY ONLY | If a tray is configured to PLAIN or ANY SIZE, and the print job does not specify the media type, the printer will adjust the print quality for the type of print media it senses. The default is EXPANDED SENSING, which senses transparencies, glossy paper, and tough paper. |
| INK TRANSPARENCY | REJECT-GUARD FUSER ACCEPT-NOT ADVISED | REJECT-GUARD FUSER stops the print job when a non-compatible transparency is detected. This option protects the printer fuser from damage. ACCEPT-NOT ADVISED allows the job to print normally even though a non-compatible transparency is being used. The default value is REJECT-GUARD FUSER. |
| FUSER MODES | A list of available modes appears. | Allows you to associate each paper type with a specific print mode. |
| OPTIMIZE | T1 DOWN T1 UP T2 UP 1 T1 UP 2 T2 DOWN 1 T2 DOWN 2 LEADING EDGE UP LEADING EDGE DOWN REDUCE BKGROUND 1 REDUCE BKGROUND 2 FUSER DOWN 1 FUSER DOWN 2 FILM OFFSET GHOST PREVENTION PRE-ROTATION RESTORE OPTIMIZE | Allows you to optimize certain parameters for all jobs rather than (or in addition to) optimizing by paper type. The default for each item is OFF. RESTORE OPTIMIZE resets all of the values to OFF. |
| CALIBRATE NOW | Performs all printer calibrations to optimize print quality. | |
| CREATE CLEANING PAGE | Prints a cleaning page to be used for cleaning the printer. This page contains instructions for processing the cleaning page. See Cleaning the printer for more information. | |
| PROCESS CLEANING PAGE | After the cleaning page is loaded in Tray 1, this menu item allows the printer to process the cleaning page. The cleaning process takes a few moments. See Cleaning the printer for more information. |